iQOO Neo6 has a 64MP OIS main camera with GW1P sensor, which takes amazing motion pictures even when zooming in. OIS can minimize image blurs caused by shaking. In this guide, we have the latest stock firmware flash file for the iQOO Neo 6 PD2199F powered by a Qualcomm SM8250-AC Snapdragon 870 5G processor. To install the firmware flash file, we need a software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, to fix Bluetooth and WiFi issues, to unroot or bypass the FRP lock. So without further wasting our time, let’s understand what is stock firmware flash file.
Also Read
Download Google Camera for iQOO Neo 6 | GCam APK
iQOO Neo 6 Overview
iQOO Neo 6 was launched in India as the company’s latest addition to the iQoo Neo series. The device features a 6.62-inch full-HD+ E4 AMOLED display with a 120Hz refresh rate and runs on runs on Android 12 with Funtouch OS 12 on top. Under the hood, iQOO Z6 Pro is powered by the Qualcomm Snapdragon 870 SoC, coupled with up to 12GB of RAM.
The smartphone sports a triple rear camera setup with a 64 MP primary camera, an 8 MP ultra-wide-angle shooter, and a 2 MP macro camera. For selfies and video chats, the iQOO Neo 6 comes with a 16 MP camera in the front.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the iQOO Neo 6 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from iQOO Neo 6
- You can fix the boot loop issue on iQOO Neo 6
- Fix Unfortunately, the app has stopped errors on iQOO Neo 6
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot iQOO Neo 6
- To Reset or Remove FRP on your device
- Restore iQOO Neo 6 back to Factory State
Firmware Details:
- Device Name: iQOO Neo 6 PD2199F
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash tool
- Processor: Qualcomm SM8250-AC Snapdragon 870 5G
- Android Version: Android 12 with FuntouchOS 12
How to Install iQOO Neo 6 PD2073F Flash File
Before installing the Stock ROM on your iQOO Neo 6, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: iQOO Neo 6 PD2055F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Full Data Backup without Root
- Nandroid Backup via TWRP
- Download Flash Tool: Download AFTool | QFil Flash Tool or QPST Flash tool
- Download Drivers: Qualcomm USB Drivers and Vivo USB Drivers
Download Flash Files
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.
- Full Data Backup without Root
- Nandroid Backup via TWRP
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via QFIL Tool:
Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool
Guide to Install Stock ROM using QFIL Tool
Method 3: Instructions to Install via MSM Download tool:
- Download the MSM Download tool, firmware, and drivers on your PC.
- Now install the USB drivers
- Place the MSM download tool and firmware in the same folder
- Open the MSM download tool and connect your device to PC/Laptop
- Once you connect, it will automatically load the firmware, if not select it manually.
- Click on the start button and wait patiently to complete the installation process.
- Once it is done! remove your device from your PC. That’s it!
That’s it, guys. We hope that you’ve installed the Stock Firmware on your iQOO Neo 6 PD2073F device successfully. Feel free to ask in the comments below for any queries.
